CCBBB - AUTO POLISH

  • MSDS: CCBBB
  • Manufacturer: RACERS EDGE PRODUCTS
  • Product Name: AUTO POLISH
  • National Stock Number: 7930-00N073411
Product Identification

Product ID:AUTO POLISH
MSDS Date:05/01/1993
FSC:7930
NIIN:00N073411
MSDS Number: CCBBB

Responsible Party
RACERS EDGE PRODUCTS
19431 BUSINESS CENTER DR 30
NORTHRIDGE, CA 91324
US

Emergency Phone: 213-664-2121;800-424-9300(CHEMTREC)

Info Phone: 213-664-2121

Preparer: R LUKICH, C ROSS

Cage: JO391

Contractor
RACERS EDGE PRODUCTS
NORTHRIDGE, CA 91324 US

Telephone: 213-664-2121

Cage: JO391

Ingredients

NAPHTHA, HEAVY STRAIGHT RUN; (MINERAL SPIRITS (STODDARD

CAS: 64741-41-9

Fraction By Weight: 10-12%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


PARAFINS, CYCLOPARAFINS AND AROMATICS

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K


ISOPROPYL ALCOHOL; (ISOPROPANOL) (SARA 313)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 2-5%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM/500STEL


TURPENTINE

CAS: 8006-64-2

RTECS: YO8400000

Fraction By Weight: 2-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


MORPHOLINE

CAS: 110-91-8

RTECS: QD6475000

Fraction By Weight: 1/2-1%

OSHA PEL 20 PPM, S

ACGIH TLV: 20 PPM, S


POLYDIMETHYL SILOXANE; (POLYSILOXANE MIXTURE)

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 60-70%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: THIS PRODUCT MAY BE AN
EYE IRRITANT. SKIN: PROLONGED SKIN CONTACT MAY RESULT IN IRRITATION
AND/OR DERMATITIS. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: GENTLY FLUSH W/LGE QTYS OF WATER FOR AT LEAST 15 MIN.
SEEK MED ATTN IMMED. SKIN: REMOVE ANY CONTAM CLTHG. WASH W/SOAP &
LGE QTYS OF WATER. SEEK MED ATTN IF IRRITATED. INHAL: IF BRTHG
DFCLTYS, DI ZZ/LT-HEAD OCCUR WHEN WORKING IN AREAS W/HIGH VAP CONC,
MOVE TO OUTSIDE AIR IMMED. IF BRTHG STOPS, BEGIN ARTF RESP & SEEK
IMMED MED ATTN. INGEST: IF THIS PROD IS SWALLOWED, SEEK MED ATTN
(SUP DAT)

Fire Fighting

Flash Point:>200F,>93C
Extinguishing Media:USE FOAM, CARBON DIOXIDE, OR DRY CHEMICAL FIRE
FIGHTING APPARATUS.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . AVOID SPREADING BURNING LIQUID WITH WATER. CONTACT FIRE
DEPARTMENT IMMEDIATELY.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION.

Accidental Release

Spill Release Procedures:STAY UPWIND AND AWAY FROM SPILL UNLESS WEARING
APPROPRIATE PROTECTIVE EQUIPMENT. STOP AND/OR CONTAIN SPILL IF IT
CAN BE DONE SAFELY. KEEP ALL SOURCES OF IGNITION AWAY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP PROD CONTRS COOL, DRY & AWAY FROM
SOURCES OF IGNIT. USE & STORE W/ADEQ VENT. PERS SHOULD AVOID INHAL
OF VAPS.
Other Precautions:SHOULD CONT BE MADE, REMOVE SATURATED CLTHG & FLUSH
W/WATER. USE IN WELL-VENTD AREAS. KEEP OUT OF REACH OF CHILDREN.
FOR INDUS USE ONLY. DANGER: CONTAINS PETRO DISTIL & MORPHOLINE.
HARMFUL IF SWALLOWE D. IF SWALLOWED DO NOT INDUCE (SUP DAT)

Exposure Controls

Respiratory Protection:USE OF RESPIRATORY PROTECTION DEPENDS ON VAPOR
CONCENTRATION OF THE TIME-WEIGHTED TLV. USE A RESPIRATOR/GAS MASK
W/APPROPRIATE CARTRIDGES & CANISTER (NIOSH APPROVED, IF
AVAILABLE)/SUPPLIED AIR EQUIPME NT, DEPENDING ON AIRBORNE
CONCENTRATION.
Ventilation:IF GENERAL MECH VENT PROVES INADEQ TO MAINTAIN SAFE VAPOR
CONCS, SUPPLEMENTAL LOCAL EXHAUST MAY BE REQUIRED. (SUP DAT)
Protective Gloves:HEAVY RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . IMPERMEABLE APRONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: IMMED. DO NOT INDUCE VOMIT UNLESS DIRECTED BY MD. VENT:
OTHER SPECIAL PREC, SUCH AS RESP PROT, MAY BE REQUIRED IF VAP CONCS
CANNOT BE REDUCED TO BELOW TLV BY VENT. OTHER PREC: VOMIT. C ALL MD
IMMED. AVOID EYE CONT & PRLNG SKIN CONT.

Chemical Properties

Boiling Pt:B.P. Text:>140F,>60C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT TAN, WITH CHARACTERISTIC ODOR
Percent Volatiles by Volume:38

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES, AND SELECTED AMINES.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND/OR CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH APPLICABLE
LOCAL, COUNTY, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.